Description
Description
Highly adhesive transparent silicone grease for fittings, seals and plastic parts.
Applications
- Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
- Lubrication of O-rings and rubber seals for assembly and during operation
- Lubrication of plastic parts
Branches
- Catering equipment and food processing technology
- Shipbuilding and marine technology
- Logistics
- Chemical industry
- Paper and packaging industry
- Iron and steel industry
- Rail vehicle technology
- Glass and foundry industry
- Municipal services
- Plant and machine (tool) engineering
- Rubber and plastic processing
Advantages and benefits
- NSF H1 registered
- Tasteless and odourless
- Highly effective due to excellent adhesion on all materials
- Neutral behaviour with regard to plastics and elastomers
- Completely EPDM-compatible
- High long-term stability without drying out, hardening or bleeding
- Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
- MOSH/MOAH-free (as per recipe)
Application tips
Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer’s instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.
Packaging
10 ml Tube, 80 ml Tube, 400 ml Cartridge, 4 g Tube, 500 g Can, 1 kg Can, 5 kg Hobbock , 25 kg Hobbock , 180 kg Drum
Technical data
| Standard | Conditions | Unit | Value | |
| Main components | ||||
| base oil | polydimethylsiloxane | |||
| thickener | inorganic | |||
| Application related technical data | ||||
| marking | DIN 51 502 | DIN 51 825 | MSI3S-40 | |
| viscosity at (40°C) | DIN 51 562-1 | base oil | mm²/s | 9,500 |
| viscosity at (100°C) | DIN 51 562-1 | base oil | mm²/s | 3,800 |
| drop point | DIN ISO 2176 | °C | without | |
| consistency | DIN 51 818 | DIN ISO 2137 | NLGI grade | 3 |
| unworked penetration | DIN ISO 2137 | 0.1 mm | 180-210 | |
| flow pressure | DIN 51 805 | -40°C | mbar | < 100 |
| flow pressure | DIN 51 805 | 20°C | mbar | 50 |
| oil separation | DIN 51 817 | 18h/40°C | percent in
weight |
<0.01 |
| oil separation | DIN 51 817 | 168h/40°C | percent in
weight |
<0.05 |
| resistance to oxidation | DIN 51 808 | 100h/99°C | bar | < 0.3 |
| lower operating temperature | °C | -40 | ||
| upper operating temperature | °C | 200 | ||
| colour | transparent | |||
| density (at 20°C) | DIN EN ISO 3838 | g/cm³ | 0.96 | |
| water resistance | DIN 51 807-1 | 90°C | Degree | 0-90 |
| SKF-EMCOR | DIN 51 802 | corr. degree | 3-4 | |
| Product specific technical data | ||||
| evaporation loss | DIN 58 397-1 | 30h, 200°C | percent in
weight |
< 2.5 |
| Properties and approvals | ||||
| approval for food processing technology | NSF H1, Reg.-Nr. 124381 | |||
| drinking water approval | UBA guideline (D) | test certificate OFI-1085-753 | ||
| drinking water approval | ACS-conformity to
positive lists (F) |
test certificate 22 CLP LY 24 | ||
| Tested for beer foam compatibility | approval of the BPV
Weihenstephan |
|||
Reviews
There are no reviews yet.