Description
Mobil DTE™ 20 Series oils are high performance anti-wear hydraulic oils.
They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well as other hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools.
These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics.
Features and Benefits
- Excellent oxidation stability helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life
- Enhanced anti-wear and corrosion protection of system components using various metallurgy help extend component life and improve production capacity
- Controlled demulsibility protects systems from small and large quantities of water
- Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance
- Quality reserve maintains performance features even under severe service conditions and extended drain intervals.
Applications
- Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
- Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset
- Where small amounts of water are unavoidable
- Systems containing gears and bearings
- Machines employing a wide range of components using various metallurgySpecifications and Approvals
This product has the following approvals: MOBIL DTE 22 MOBIL DTE 24 MOBIL DTE 25 MOBIL DTE 26 MOBIL DTE 27 Denison HF-0 X X X Fives Cincinnati P-68 X HOCNF Norway-NEMS, Black X X X X Husky HS 207 X
| This product is recommended for use in applications requiring: | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 |
| Eaton I-286-S | X | X | X | ||
| Eaton M-2950-S | X | X | X |
| This product meets or exceeds the requirements of: | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 |
| DIN 51524-2:2006-09 | X | X | X | X |
Properties and Specifications
|
Property |
MOBIL DTE 21 | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 | MOBIL DTE 28 |
| Grade | ISO 10 | ISO 22 | ISO 32 | ISO 46 | ISO 68 | ISO 100 | ISO 150 |
| Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 |
1B |
1B |
1B |
1B |
1B |
1B |
1B |
| FZG Scuffing, Fail Load Stage, A/8.3/90, ISO 14635-1 |
12 |
12 |
12 |
12 |
12 |
||
| Flash Point, Cleveland Open Cup, °C, ASTM D92 |
174 |
200 |
220 |
232 |
236 |
248 |
276 |
| Foam, Sequence I, Stability, ml, ASTM D892 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Foam, Sequence I, Tendency, ml, ASTM D892 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Foam, Sequence II, Stability, ml, ASTM D892 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Foam, Sequence II, Tendency, ml, ASTM D892 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
| Foam, Sequence III, Stability, ml, ASTM D892 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Foam, Sequence III, Tendency, ml, ASTM D892 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
2.7 |
4.5 |
5.3 |
6.7 |
8.5 |
10.9 |
14.3 |
| Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
10 |
21 |
31.5 |
44.2 |
71.2 |
95.3 |
142.8 |
| Pour Point, °C, ASTM D97 | -30 | -30 | -27 | -27 | -21 | -21 | -15 |
| Rust Characteristics, Procedure B, ASTM D665 |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
| Viscosity Index, ASTM D2270 | 98 | 98 | 98 | 98 | 98 | 98 | 98 |
Reviews
There are no reviews yet.