Description
Description
OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water.
Applications
- Lubrication of open toothing, friction and rolling bearings, threaded spindles, hinges, guides on windlasses, ship´s cranes, underwater devices, offshore components or in wet areas of the textile industry
- Corrosion protection of moving parts subject to seawater in coastal and marine areas or constant influence of water
Branches
- Iron and steel industry
- Logistics
- Rail vehicle technology
- Municipal services
- Shipbuilding and marine technology
- Rubber and plastic processing
- Paper and packaging industry
- Chemical industry
- Plant and machine (tool) engineering
- Glass and foundry industry
Advantages and benefits
- Excellently suited as a waterproof special grease above and under water
- Highly effective due to optimum wear and outstanding corrosion protection
- Economical due to combined protective effect
Application tips
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate lubricants.
Packaging
400 ml Cartridge, 1 kg Can, 5 kg Hobbock, 25180 kg Drum180 kg Drum kg Hobbock, 180 kg Drum.
Technical data
| Standard | Conditions | Unit | Value | |
| Main components | ||||
| base oil | mineral oil | |||
| thickener | calcium soap | |||
| Application related technical data | ||||
| marking | KP1-2E-20 | |||
| viscosity at (40°C) | DIN 51 562-1 | base oil | mm²/s | 100 |
| viscosity at (100°C) | DIN 51 562-1 | base oil | mm²/s | 9 |
| drop point | IP 396 | °C | > 100 | |
| consistency | DIN 51 818 | DIN ISO 2137 | NLGI grade | 1-2 |
| worked penetration | DIN ISO 2137 | 60DH | 0.1 mm | 285-315 |
| lower operating temperature | DIN 51 805 | ≤ 1,400 hPa | °C | -25 |
| upper operating temperature | DIN 51 821-2 | F50 (A/1500/600), 100h | °C | 80 |
| maximal operating temperature | °C | 80 | ||
| colour | brown | |||
| density (at 20°C) | DIN 51 757 | g/cm³ | 0.94 | |
| water resistance | DIN 51 807-1 | 40°C | Degree | 0-40 |
| DN value (dm x n) | mm/min | 350,000 | ||
| four-ball test rig welding load | DIN 51 350-4 | N | 3,000 | |
| SKF-EMCOR | DIN 51 802 | with 3% NaCl solvent | corr. degree | 0-1 |
Reviews
There are no reviews yet.