Address: Al Sabha Building, G-72 Jebel Ali Industrial Area-1
For Order Call Us +971 56 716 8226
Primary Email: [email protected] Secondary Email: [email protected]
Mobil Delvac 1 Gear Oil 75W-90 is a fully synthetic drivetrain lubricant engineered to meet very demanding extended drain and warranty requirements. This product is designed for use in heavy-duty drivetrains that require gear lubricants with excellent load-carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac 1 Gear Oil 75W-90 incorporates synthetic basestock and advanced additives providing significant advantages over conventional gear oils
Standard Delivery (Signed for) | Delivered within 3-5 working days |
Express Delivery (Standard Parcels) | Delivered within 1-2 working days |
Extra-Large Parcels (Signed for) | Delivered within 3-5 working days |
Furniture | Delivery usually takes place within 2 weeks. |
Mobil Delvac 1 Gear Oil 75W-90 is a fully synthetic drivetrain lubricant engineered to meet very demanding extended drain and warranty requirements. This product is designed for use in heavy-duty drivetrains that require gear lubricants with excellent load-carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac 1 Gear Oil 75W-90 incorporates synthetic basestock and advanced additives providing significant advantages over conventional gear oils.
The state-of-the-art technology in Mobil Delvac 1 Gear Oil 75W-90 delivers excellent performance, helps to protect against thermal degradation and oxidation, contributes to reduced wear and corrosion, improved shear stability and extended service capability.
Today’s technology has vastly improved the performance capabilities of heavy-duty on and off-highway equipment load, torque, speed, and control through innovative drivetrain designs. These designs have changed and increased the requirements of lubricants to deliver this higher level of performance, increase productivity, and reduce operating costs. For heavy-duty final drives, friction control, wear protection, thermal stability, shear stability, rust and corrosion prevention, and seal protection are features that must be optimally balanced to contribute to extended gear and seal life, smooth operation, improved fuel economy potential and high load high torque capability over a wide range of applications.
Features | Advantages and Potential Benefits |
Exceptional thermal stability and resistance to high temperature oxidation | Long gear and bearing life due to minimal deposits Long seal life |
Outstanding protection against low speed/high torque wear and high speed scoring | Increased load-carrying capability.
Helps to reduce maintenance costs and long equipment life |
Exceptional shear stability |
Helps to retain viscosity and film strength under severe operating conditions to prevent wear |
Enhanced friction reduction properties | Has potential for fuel economy and reduce operating costs |
Outstanding low temperature fluidity versus conventional oils | Helps to Reduce wear and ease of start-up |
Good resistance to foaming | Helps to maintain film strength for reliable lubrication |
Compatible with typical automotive seals and gaskets | Minimum leakage and reduced contamination |
This product has the following approvals: |
Dana SHAES 256 Rev C |
Dana SHAES 429 |
Detroit Fluids Specification 93K219.01 |
HYUNDAI DYMOS P110SS AXLE – Low Floor Rear Axle |
Mack GO-J Plus |
MAN 342 Typ M2 |
MB-Approval 235.8 |
Navistar, Inc. MPAPS B-6821 |
SAE J2360 |
Voith Turbo 132.00374401 |
Voith Turbo 132.00374402 |
VOLVO 97312 |
ZF TE-ML 05A |
ZF TE-ML 12L |
ZF TE-ML 12N |
ZF TE-ML 16F |
ZF TE-ML 17B |
ZF TE-ML 19C |
ZF TE-ML 21A |
Siemens Traction Gears GmbH (former Flender Rail) T7302 |
Meritor O-95 |
This product meets or exceeds the requirements of: |
API GL-5 |
API MT-1 |
R. Bosch AS TE-ML 08 |
ISUZU Axle Oil |
ISUZU Large Manual Transmission Oil |
ISUZU LCV Front Axle Oil |
Meritor O-76-N |
Property | |
Grade | SAE 75W-90 |
Density @ 15.6 C, kg/l, ASTM D4052 | 0.86 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 | 205 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 15.0 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 120 |
Pour Point, °C, ASTM D97 | -48 |
Viscosity Index, ASTM D2270 | 140 |
There are no reviews yet.